Dirty Hooker Diesel - Intercooler Tubes & Boots

2003-2004 Ford 6.0L Power Stroke

OE #'s 6C3Z6C640C, 6C3Z6C640CA

2004½-2007 Ford 6.0L Power Stroke 

OE #'s 6C3Z6C640A, 6C3Z6C640AA

Aluminum Weld on 3" Billet Connector

Do you have cracked or bent intercooler boost tubes? Banks boost tubes are designed to give you greater cooling capacity. Banks boost tubes are manufactured from quality materials to ensure performance and durability. The Banks boost tube is larger than the factory pipe which will improve airflow, and allow the turbo charger to spool up faster. Will work with a stock intercooler or as an add-on to our Intercooler for 2006-2009 Duramax. (upgraded boost tubes included with earlier kits). , Intercooler Pipe Diameter: 3.000 in. Intercooler Pipe Material: Steel, Intercooler

Pipe Finish: Red powder-coated.

Fits LLY, LBZ, and LMM diesel engines only. Driver side tube. Includes spring loaded hose clamps. Tube has 2.375 in. reduction.

This kit does not include the boot at the intercooler. This tube is designed to work with your factory intercooler boot. If you need a replacement boot see part # 15124211  or PPE 115900200

Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.

• Each Hose is designed to meet 3x their working pressure
• Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
• Higher pressure applications have a Red Iron Oxide internal color
• Flurosilicone elastomers and Fluorocarbon withstands oily residues
• Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

• 1 Hour

Parts

• 12-Months
• 24,000 Miles

Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.

• Each Hose is designed to meet 3x their working pressure
• Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
• Higher pressure applications have a Red Iron Oxide internal color
• Flurosilicone elastomers and Fluorocarbon withstands oily residues
• Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

• 1 Hour

Parts

• 12-Months
• 24,000 Miles

• Kit contains driver's side boots & clamps only

Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.

• Each Hose is designed to meet 3x their working pressure
• Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
• Higher pressure applications have a Red Iron Oxide internal color
• Flurosilicone elastomers and Fluorocarbon withstands oily residues
• Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

• 1 Hour

Parts

• 12-Months
• 24,000 Miles

DHD 036-0261282 3" Reinforced Charged Air Cooler Silicon Coupler Black

This is our most popular silicon boot, as it is 3 long by 3 in diameter and is reinforced with support rings for extreme amounts of boost pressure. We use this for all of our 3 transitions in the shop and include this boot with all of our Big Air Kits. Boot is black in color with a white DHD logo.

DHD 036-0261569 Long 3"-60mm Reducer Boot Black

Our DHD silicon reducer boot is the boot we supply in all of our hot-side intercooler and intake manifold kits. This boot is 3 in length and reduces to 60mm and makes a perfect fit for the turbocharger outlet on the GM Duramax diesels.

DHD 036-7589 Long 3"-60mm Reducer Boot 8 ply Black

Our DHD silicon reducer boot is the boot we supply in all of our hot-side intercooler and intake manifold kits. This boot is 3 in length and reduces to 60mm and makes a perfect fit for the turbocharger outlet on the GM Duramax diesels. This new boot is now 8 ply, much thicker and strong than others.

DHD 400-000044 1" Straight Silicon T-Bolt Clamp Insulator

Replacement 1 silicon insulator that is used on our LBZ/LMM high flow intake upgrade kits.

DHD 400-000045 3" Straight Silicon Connector Boot

This is a 3 silicon straight coupler that is approximately 3 in overall length. It can be used as a straight section of intake or cut to any length. Most common uses are joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet, exc.

DHD 400-000064 Short 2.5-3" Silicon Reducer Boot

This is a 3-To-2.5 silicon reducer boot. This boot is 3 in overall length and can be used for joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet, exc.

DHD 400-103 GM Duramax Diesel (2001-2010) Hot Side Intercooler Kit Aluminum

The DHD intercooler tube represents the next level of air intake products for your Duramax Diesel!

Our ALUMINUM tubes outflow the factory intercooler tube by approximately 35%-40% and are a 100% perfect fit. Unlike our competitors who use steel, our tubes are lighter, more corrosive resistant and mandrel bent for superior flow and lower EGT's.

The DHD intercooler tube kit includes:

-Heavy duty silicone straight coupler

-Silicone 3" to 2.5" Reducer

-3 3" stainless steel T-bolt clamps

-3" Mandrel Bent Aluminum Heat Treated Intercooler Tube

-Finish: RAW

-Brake Hose Relocation Tab

-Choose from our Standard Reducer or Upgrade to our Reinforced 8-ply Reducer (See options)

DHD 400-104 LML Duramax Diesel Hot Side Intercooler Tube Upgrade Kit Aluminum

The DHD intercooler tube represents the next level air intake products for your Duramax Diesel. Our tubes outflow the factory intercooler tube by approximately 35%-40%. Our tubes are a 100% perfect fit and come complete with our heavy duty silicon couplers and stainless steel T-bolt clamps for a secure installation. Our pipes are assembled from 3" mandrel bent aluminum tubing for maximum flow and lite weight. Most aftermarket tubes are either steel which is heavy and not very corrosion resistant. All or our DHD intercooler tubes will have smooth transition bends that allow for low resistance airflow, increasing horsepower, torque and lowering EGTs!

Note: Our LML tube is a true "one-piece" design. All of the other tubes available on the aftermarket are a two-piece unit. With this kit you will retain two of your factory T-Bolt clamps.

The DHD intercooler tube represents the next level air intake products for your Duramax Diesel. Our tubes are a 100% perfect fit and comes complete with our heavy duty silicon couplers and stainless steel T-bolt clamps for a secure installations. Included is one bung for air temp sensor. Our pipes are assembled from 3” mandrel bent heat treated aluminum tubing for maximum flow and lite weight. Most aftermarket tubes are steel which is heavy and not very corrosion resistant. All of our DHD intercooler tubes will have smooth transition bends that allow for low resistance airflow, increasing horsepower, torque and lowering EFTs! Fitment: Intercooler Tube Cold Side: GM Diesel Trucks 11-15 V8-6.6L (td) LML

DHD 402-102 LLY Duramax Cold Side Intercooler Kit Aluminum

The DHD intercooler tube represents the next level air intake products for your Duramax Diesel. Our tubes outflow the factory intercooler tube by approximately 35%-40%. Our tubes are a 100% perfect fit and come complete with our heavy duty silicon couplers and stainless steel T-bolt clamps for a secure installation. Our pipes are assembled from 3" mandrel bent aluminum tubing for maximum flow and lite weight. Most aftermarket tubes are either steel which is heavy and not very corrosion resistant. All or our DHD intercooler tubes will have smooth transition bends that allow for low resistance airflow, increasing horsepower, torque and lowering EGTs!

DHD 404-101 LB7 Duramax Cold Side Intercooler Kit Aluminum

The DHD intercooler tube represents the next level air intake products for your Duramax Diesel. Our tubes outflow the factory intercooler tube by approximately 35%-40%. Our tubes are a 100% perfect fit and come complete with our heavy duty silicon couplers and stainless steel T-bolt clamps for a secure installation. Our pipes are assembled from 3" mandrel bent aluminum tubing for maximum flow and lite weight. Most aftermarket tubes are either steel which is heavy and not very corrosion resistant. All or our DHD intercooler tubes will have smooth transition bends that allow for low resistance airflow, increasing horsepower, torque and lowering EGTs!

DHD CLA000104 2" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 2.13" to 2.44".

Features:

• Smooth on the inside and will not bite into silicone like worm gear clamps.
• Clamping ability is over 20 times greater than worm gear clamps.
• Bolt is easy to tighten since it is out away from the clamping surface.
• Clean, shiny, and professional looking - show quality clamps.
• Do not get dirty as easily as worm gear clamps, and are easier to clean.

DHD CLA000104 2.25" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 2.36" to 2.68".

Features:

• Smooth on the inside and will not bite into silicone like worm gear clamps.
• Clamping ability is over 20 times greater than worm gear clamps.
• Bolt is easy to tighten since it is out away from the clamping surface.
• Clean, shiny, and professional looking - show quality clamps.
• Do not get dirty as easily as worm gear clamps, and are easier to clean.

DHD CLA000102 2.5" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.

Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling.

Actual clamping ability is 2.60" to 2.91"..

DHD CLA000104 3" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 3.11" to 3.43".

DHD CLA000105 3.5" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.

Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling.

Actual clamping ability is 3.62" to 3.94".

DHD CLA000104 1.75" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 1.89" to 2.20".

Features:

• Smooth on the inside and will not bite into silicone like worm gear clamps.
• Clamping ability is over 20 times greater than worm gear clamps.
• Bolt is easy to tighten since it is out away from the clamping surface.
• Clean, shiny, and professional looking - show quality clamps.
• Do not get dirty as easily as worm gear clamps, and are easier to clean.

DHD CLA000108 3.25" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.

Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling.

Actual clamping ability is 3.34" to 3.73".

DHD CLA000104 4" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 4.09" to 4.41".

Features:

• Smooth on the inside and will not bite into silicone like worm gear clamps.
• Clamping ability is over 20 times greater than worm gear clamps.
• Bolt is easy to tighten since it is out away from the clamping surface.
• Clean, shiny, and professional looking - show quality clamps.
• Do not get dirty as easily as worm gear clamps, and are easier to clean.

DHD CLA000104 4.5" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 4.49" to 4.80".

Features:

• Smooth on the inside and will not bite into silicone like worm gear clamps.
• Clamping ability is over 20 times greater than worm gear clamps.
• Bolt is easy to tighten since it is out away from the clamping surface.
• Clean, shiny, and professional looking - show quality clamps.
• Do not get dirty as easily as worm gear clamps, and are easier to clean.

DHD CLA000104 5" Stainless Steel T-Bolt Clamp Intercooler Hose Clamp

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any logos. This clamp is designed for 3 and/or 4-ply silicone coupling. Actual clamping ability is 5.12" to 5.43".

Features:

• Smooth on the inside and will not bite into silicone like worm gear clamps.
• Clamping ability is over 20 times greater than worm gear clamps.
• Bolt is easy to tighten since it is out away from the clamping surface.
• Clean, shiny, and professional looking - show quality clamps.
• Do not get dirty as easily as worm gear clamps, and are easier to clean.

This is a genuine GM cold side lower intercooler tube boot for the 04-05 LLY Duramax Diesel.

This is a genuine GM hot side lower intercooler tube boot for the LMM LBZ LLY Duramax Diesel 04.5-10.

A blown intercooler boot can mean the end to a weekend at the drag strip or a canceled day on the boat. You demand a lot from your truck, so you need reliable and dependable parts. Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore technology designed specifically for the 6.6L Chevrolet/GMC Duramax. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. As with all our products, this boot kit includes the Mishimoto lifetime warranty.

Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore technology designed specifically for the 6.6L Chevrolet/GMC Duramax. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. As with all our products, this boot kit is protected by the Mishimoto lifetime warranty.

The Mishimoto 6.6L Duramax intercooler pipe and boot kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum cold-side and hot-side piping accompanied by silicone boots with DuraCore technology. Mishimoto 6.6L Duramax intercooler piping is engineered to eliminate restrictive bends present in the factory pipes. This results in improved airflow, more power, and lower EGTs that will support your Duramax at any power level. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Upgrade to the Mishimoto 6.6L intercooler pipe and boot kit and give your Duramax the efficient, unimpeded airflow it needs to make more power. To further improve your charge-air system, pair this pipe kit with the Mishimoto 6.6L performance intercooler. This kit is made in the USA and includes the Mishimoto signature lifetime warranty.

Improve the power and efficiency of your Duramax with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the 2004.5-2010 Duramax features numerous restrictive bends and chokes the engine with 2.5 piping. The 3 diameter of the Mishimoto intercooler pipe provides a significant increase in airflow that results in more power and lower EGTs. The Mishimoto hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and features mandrel bent aluminum with a polished finish. Mishimoto intercooler piping kits feature our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. This hot-side pipe is the perfect addition to the Mishimoto 6.6L Duramax performance intercooler. The Mishimoto hot-side intercooler pipe and boot kit is made in the USA and includes our signature lifetime warranty.

Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2006-2010 6.6L Duramax. The factory pipe and boot do not stand a chance against the heat and pressure of your high-powered Duramax; upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto cold-side pipe is constructed of mandrel bent aluminum with a polished finish. This cold-side pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.6L Duramax performance intercooler. This kit is made in the USA and includes our signature lifetime warranty.

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber
_ Replaces GM 15188715

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Available Silicone Hose Sizes:
1) Elbow Coupling (115900100) (GM 15061708) 6mm 5PLY
2) Elbow Coupling (115900200) (GM 15124211) 6mm 5PLY
3) Elbow Coupling (115900300) (GM 15034797) 6mm 5PLY
4) Coupling (115900400) (GM 15198167) 6mm 5PLY
5) Flexible Coupling (115900500) (GM 15188715) 6mm 5PLY
6) Elbow Coupling (115900600) (GM 15124210) 6mm 5PLY
7) Flexible Coupling (115900700) (GM 15188721) 6mm 5PLY
8) Flexible Coupling (115900800) (GM 15102148) 6mm 5PLY
9) Flexible Coupling (115900900) (GM25869099) 6mm 5PLY
10) Flexible Coupling (115901000) (GM AKE98909) 6mm 5PLY
11) Flexible Coupling (115901100) (GM CP0630R2) 6mm 5PLY

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber


(A) 6mm 5-ply Silicone Hose (1) (115900100) (GM 15061708) Use clamp (E)

(B) 6mm 5-ply Silicone Hose (1) (115900200) (GM 15124211) Use clamp (F)

(C) 6mm 5-ply Silicone Hose (1) (115900300) (GM 15034797) Use clamp (F)

(D) 6mm 5-ply Silicone Hose (1) (115900000) (GM 15034798) Use clamp (E)

(E) 71/63mm T-Bolt Clamps (4) (515275225)

(F) 92/84mm T-Bolt Clamps (4) (515350300)

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber


(A) 6mm 5-ply Silicone Hose (1) (115900100) (GM 15061708) Use clamp (E)

(B) 6mm 5-ply Silicone Hose (1) (115900200) (GM 15124211) Use clamp (F)

(C) 6mm 5-ply Silicone Hose (1) (115900300) (GM 15034797) Use clamp (F)

(D) 6mm 5-ply Silicone Hose (1) (115900400) (GM 15198167) Use clamp (E)

(E) 71/63mm T-Bolt Clamps (4) (515275225)

(F) 92/84mm T-Bolt Clamps (4) (515350300)

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber


(A) 6mm 5-ply Silicone Hose (1) (115900500) (GM 15188715) Use clamp (E)

(B) 6mm 5-ply Silicone Hose (1) (115900200) (GM 15124211) Use clamp (F)

(C) 6mm 5-ply Silicone Hose (1) (115900600) (GM 15124210) Use clamp (F)

(D) 6mm 5-ply Silicone Hose (1) (115900500) (GM 15188715) Use clamp (E)

(E) 71/63mm T-Bolt Clamps (4) (515275225)

(F) 92/84mm T-Bolt Clamps (4) (515350300)

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber

(A) 6mm 5-ply Silicone Hose (1) (115900500) (GM 15188715) Use clamp (D)

(B) 6mm 5-ply Silicone Hose (1) (115900200) (GM 15124211) Use clamp (E)

(C) 6mm 5-ply Silicone Hose (1) (115900800) (GM 15102148) Use clamp (E)

(D) 71/63mm T-Bolt Clamps (4) (515275225)

(E) 92/84mm T-Bolt Clamps (4) (515350300)

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temperatures
_ Higher flow and better lubricity then rubber



(A) 6mm 5-ply Silicone Hose (1) (115900500) (GM 15188715) Use clamp (E)

(B) 6mm 5-ply Silicone Hose (1) (115901000) (GM AKE98909) Use clamp (H)

(C) 6mm 5-ply Silicone Hose (1) (115900900) (GM 25869099) Use clamp (F)

(D) 6mm 5-ply Silicone Hose (1) (115901100) (GM CP0630R2) Use clamp (G)

(E) 71/63mm T-Bolt Clamps (2) (515275225)

(F) 92/84mm T-Bolt Clamps (2) (515350300)

(G) 94/86mm T-Bolt Clamps (2) (515375325)

(H) 78/70mm T-Bolt Clamps (2) (515300250)

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Available Silicone Hose Sizes:
1) Hump (515303088) 3.0" D, 76mm L, 6mm 5PLY
2) Coupling (515252500) 2.5" D, 76mm L, 6mm 5PLY
3) Coupling (515303000) 3.0" D, 76mm L, 6mm 5PLY
4) Coupling (515404000) 4.0" D, 63mm L, 6mm 5PLY
5) Coupling (515505000) 5.0" D, 63mm L, 5mm 4PLY
6) Coupling (515606000) 6.0" D, 63mm L, 5mm 4PLY
7) Coupling (515151500) 1.5" x 2.165" L, 5mm 4 PLY
8) Coupling (515171700) 1.75" x 2.75" L, 5mm 4 PLY
9) Coupling (515272700) 2.75" x 4" L, 6mm 4 PLY
10) Coupling (515303005) 3.0" x 5" L, 6mm 4 PLY
11) Coupling (515404005) 4.0" x 5" L, 6mm 5 PLY

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Available Silicone Hose Sizes:
1) Hump (515303088) 3.0" D, 76mm L, 6mm 5PLY
2) Coupling (515252500) 2.5" D, 76mm L, 6mm 5PLY
3) Coupling (515303000) 3.0" D, 76mm L, 6mm 5PLY
4) Coupling (515404000) 4.0" D, 63mm L, 6mm 5PLY
5) Coupling (515505000) 5.0" D, 63mm L, 5mm 4PLY
6) Coupling (515606000) 6.0" D, 63mm L, 5mm 4PLY
7) Coupling (515151500) 1.5" x 2.165" L, 5mm 4 PLY
8) Coupling (515171700) 1.75" x 2.75" L, 5mm 4 PLY
9) Coupling (515272700) 2.75" x 4" L, 6mm 4 PLY
10) Coupling (515303005) 3.0" x 5" L, 6mm 4 PLY
11) Coupling (515404005) 4.0" x 5" L, 6mm 5 PLY

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Replace your intercooler boots or almost any other boot or hose on your rig with a set of upgraded heavy duty Silicon Hoses from PPE. PPEs Silicone Hoses are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Available in various bends and straights with sizes from 2.5 inches up to 6 inches in diameter. Complete intercooler boot kits for many late-model diesel equipped vehicles are also available.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Drag racing and sled pulling places huge stress on your trucks parts in a very short period of time. But PPEs hoses were designed to handle the rigors of racing and competition. They are equally proficient at the job of towing heavy loads over long distances, all of which are due to their robust construction allowing for a burst rating of over 200 psi. Each PPE Performance Silicone Hose is strengthened with its 5 plies of polyester reinforced fibers making them very tough, although, there is more to these hoses than simply being tough. The Fluorocarbon lining offers better lubricity (that means it is slippery and resistant to chemicals) and the silicone rubber construction ensures that they will deliver constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. Being resistant to fuel, oil and chemicals while also being UV and Ozone resistant, these hoses can withstand the exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber

Drag racing and sled pulling places huge stress on your trucks parts in a very short period of time. But PPEs hoses were designed to handle the rigors of racing and competition. They are equally proficient at the job of towing heavy loads over long distances, all of which are due to their robust construction allowing for a burst rating of over 200 psi. Each PPE Performance Silicone Hose is strengthened with its 5 plies of polyester reinforced fibers making them very tough, although, there is more to these hoses than simply being tough. The Fluorocarbon lining offers better lubricity (that means it is slippery and resistant to chemicals) and the silicone rubber construction ensures that they will deliver constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. Being resistant to fuel, oil and chemicals while also being UV and Ozone resistant, these hoses can withstand the exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.

Features:
_ Working Pressure: 70 psi - BAR 4.8
_ Burst Pressure: 207 psi - BAR 14.3
_ UV and Ozone resistant
_ Handles high boost pressures, oil and fuel, high temp.
_ Higher flow and better lubricity then rubber