Stops the competition dead in their tracks. Results in our torque and power gains across the full operating rpm range, starting right off idle and marching to the shift point in each gear. Derringer is dyno calibrated to use multiple data inputs such as throttle position, rpm, vehicle speed, AFR, Knock and coolant temperature, just like your engine's ECU. Its microprocessor based electronics are able to actively and safely optimize calibrations in real time. No competitive product does that.
Derringer has six switched settings. Level 6 produces Best in Class performance knocks you back in your seat. The Level 3 setting is for work use and has great mid-range feel. When running Level 3 with a loaded work truck and/or pulling a trailer, your on ramp merging speeds and passing times are greatly improved.
Features:
Easy Install
Loaded with Features
Value Priced
Destroys the competition, not your vehicle!
ActiveSafety protects engine/powertrain
Adds up to 61 hp and 112 lb-ft
3 power levels
Interfaces with OBDII Port (On-Board Diagnostics/Information) to communicate directly with the vehicle ECU
Works while in cruise control
Emissions compliant: CARB EO D-161-115
Banks Proves They Are the BEST!
Still not convinced!? Check out the Great Derringer Shootout Below!
Got a technical question? The iDash and Derringer Owners Manuals available in the Documents Tab above.^^^
The 2020 Duramax Derringer w/Data Monster is HERE!
Stops the competition dead in their tracks. Results in our torque and power gains across the full operating rpm range, starting right off idle and marching to the shift point in each gear. Derringer is dyno calibrated to use multiple data inputs such as throttle position, rpm, vehicle speed, AFR, Knock and coolant temperature, just like your engine's ECU. Its microprocessor based electronics are able to actively and safely optimize calibrations in real time. No competitive product does that.
Derringer has six switched settings. Level 6 produces Best in Class performance knocks you back in your seat. The Level 3 setting is for work use and has great mid-range feel. When running Level 3 with a loaded work truck and/or pulling a trailer, your on ramp merging speeds and passing times are greatly improved.
Features:
Easy Install
Log up to 100 parameters for a hundreds of hours
Loaded with Features
Value Priced
Destroys the competition, not your vehicle!
ActiveSafety protects engine/powertrain
Adds up to 80 hp and 144 lb-ft
6 power levels
Interfaces with OBDII Port (On-Board Diagnostics/Information) to communicate directly with the vehicle ECU
Works while in cruise control
Still not convinced!? Check out the Great Derringer Shootout Below!
Stops the competition dead in their tracks. Results in our torque and power gains across the full operating rpm range, starting right off idle and marching to the shift point in each gear. Derringer is dyno calibrated to use multiple data inputs such as throttle position, rpm, vehicle speed, AFR, Knock and coolant temperature, just like your engine's ECU. Its microprocessor based electronics are able to actively and safely optimize calibrations in real time. No competitive product does that.
Derringer has six switched settings. Level 6 produces Best in Class performance knocks you back in your seat. The Level 3 setting is for work use and has great mid-range feel. When running Level 3 with a loaded work truck and/or pulling a trailer, your on ramp merging speeds and passing times are greatly improved.
Features:
Easy Install
Loaded with Features
Value Priced
Destroys the competition, not your vehicle!
ActiveSafety protects engine/powertrain
Adds up to 80 hp and 144 lb-ft
6 power levels
Interfaces with OBDII Port (On-Board Diagnostics/Information) to communicate directly with the vehicle ECU
Works while in cruise control
Still not convinced!? Check out the Great Derringer Shootout Below!
Description: This is a plug and play kit! All inclusive!
Ready to SHIP!
More Details »
Condition: New
Price: $821.11
Sale: $769.00
Save: 6%
Save: $52.11
Banks iDash 1.8 Data Monster Universal OBD-II Monitor Stand AloneNew
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor on the market! Easy to read 2- to 8-gauge user selectable LCD display. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously. Add Banks sensor modules such as the 4-channel analog module, 4-channel thermocouple module, and AirMouse Ambient Air Density Module for nearly infinite vehicle and weather analysis.
Stand Alone Data Logging Gauge for OBDII CAN Bus Vehicles Same Features as Super Guage but with Data-Logging Functionality
Customizable Gauge Display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values
Read up to 80 OBDII Mode 01 values
Over 300 parameters available
View Data your dash does not display
Displays accurate values your OEM dash gauges filter
Includes patented OBDII Density (exclusive to Banks)
Banks iDash 1.8 Data Monster, 2001-2010 Duramax, LB7/LLY/LBZ/LMMNew
Banks iDash 1.8 DataMonster is the smallest, most powerful plug-n-play OBD-II monitor, control interface and data logger on the market. It now seamlessly integrates with the Banks Six-Gun/EconoMind Tuner and/or SpeedBrake.
Easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters as well as internal data directly from the Banks tuner or SpeedBrake. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. It quickly controls the tuner power level and can be used to easily set the SpeedBrake mode and vehicle deceleration speed. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
iDash DataMonster Features:
Log up to 100 parameters simultaneously
Record at 5, 10 or 20 samples per second
Set flags during important events
Play back data logs on the iDash, in real-time or skip around
Export data to a computer via MicroSD card
Includes 4GB MicroSD card
Read pressures, temps, performance, and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values per gauge
Read up to 80 OBD-II Mode 01 values
View Data your dashboard does not display
Displays accurate values your OEM dash gauges filter
Includes exclusive density parameters
Log up to 20 min/max values
Built-in Shift and RPM Light
Read and clear trouble codes
Connect up to 4 iDash 1.8 gauges
Vibrant TFT LCD display readable in bright sunlight
User-selectable auto-dimming feature
Completely customizable
Fits standard 2-1/16 inch (52mm) gauge mounts
Easy installation
Expand functionality with Banks sensor modules
iDash 1.8 DataMonster for use with Banks Six-Gun/EconoMind Tuner and/or SpeedBrake.
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. It now seamlessly integrates with the Banks Six-Gun/EconoMind Tuner and/or SpeedBrake.
Easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters as well as internal data directly from the Banks tuner or SpeedBrake. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. It quickly controls the tuner power level and can be used to easily set the SpeedBrake mode and vehicle deceleration speed. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
Features:
Customizable gauge display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values per gauge
Read up to 80 OBD-II Mode 01 values
View Data your dashboard does not display
Displays accurate values your OEM dash gauges filter
Includes exclusive density parameters
Log up to 20 min/max values
Built-in Shift and RPM Light
Read and clear trouble codes
Connect up to 4 iDash 1.8 gauges
User-selectable auto-dimming feature
Fits standard 2-1/16 inch (52mm) gauge mounts
Easy Install
Features vary by application
Expand functionality with Banks sensor modules
Expand functionality with Banks Modules (Pressure/Temp Sensors, and more)
Banks iDash 1.8 Super Gauge Controller 2003-2005 5.9L CumminsNew
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. It now seamlessly integrates with the Banks Six-Gun/EconoMind Tuner and/or SpeedBrake. Easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters as well as internal data directly from the Banks tuner or SpeedBrake. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. It quickly controls the tuner power level and can be used to easily set the SpeedBrake mode and vehicle deceleration speed. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
Features:
Customizable gauge display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values per gauge
Read up to 80 OBD-II Mode 01 values
View Data your dashboard does not display
Displays accurate values your OEM dash gauges filter
Includes exclusive density parameters
Log up to 20 min/max values
Built-in Shift and RPM Light
Read and clear trouble codes
Connect up to 4 iDash 1.8 gauges
User-selectable auto-dimming feature
Fits standard 2-1/16 inch (52mm) gauge mounts
Easy Install
Features vary by application
Expand functionality with Banks sensor modules
Expand functionality with Banks Modules (Pressure/Temp Sensors, and more)
iDash 1.8 Super Gauge for use with Banks Six-Gun/EconoMind Tuner and/or SpeedBrake.
Banks iDash 1.8 Super Gauge Controller 2003-2007 6.0L PowerstrokeNew
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. It now seamlessly integrates with the Banks Six-Gun/EconoMind Tuner and/or SpeedBrake.
Easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters as well as internal data directly from the Banks tuner or SpeedBrake. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. It quickly controls the tuner power level and can be used to easily set the SpeedBrake mode and vehicle deceleration speed. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
Features:
Customizable gauge display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values per gauge
Read up to 80 OBD-II Mode 01 values
View Data your dashboard does not display
Displays accurate values your OEM dash gauges filter
Includes exclusive density parameters
Log up to 20 min/max values
Built-in Shift and RPM Light
Read and clear trouble codes
Connect up to 4 iDash 1.8 gauges
User-selectable auto-dimming feature
Fits standard 2-1/16 inch (52mm) gauge mounts
Easy Install
Features vary by application
Expand functionality with Banks sensor modules
Expand functionality with Banks Modules (Pressure/Temp Sensors, and more)
iDash 1.8 Super Gauge for use with Banks Six-Gun/EconoMind Tuner.
Banks iDash 1.8 Super Gauge Controller, 2001-2010 Duramax, LB7/LLY/LBZ/LMMNew
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. It now seamlessly integrates with the Banks Six-Gun/EconoMind Tuner and/or SpeedBrake. Easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters as well as internal data directly from the Banks tuner or SpeedBrake. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. It quickly controls the tuner power level and can be used to easily set the SpeedBrake mode and vehicle deceleration speed. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously. Add Banks sensor modules such as the 4-channel analog module, 4-channel thermocouple module, and AirMouse Ambient Air Density Module for nearly infinite vehicle and weather analysis.
Features:
Customizable gauge display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values per gauge
Read up to 80 OBD-II Mode 01 values
View Data your dashboard does not display
Displays accurate values your OEM dash gauges filter
Includes exclusive density parameters
Log up to 20 min/max values
Built-in Shift and RPM Light
Read and clear trouble codes
Connect up to 4 iDash 1.8 gauges
User-selectable auto-dimming feature
Fits standard 2-1/16 inch (52mm) gauge mounts
Easy Install
Features vary by application
Expand functionality with Banks sensor modules
Expand functionality with Banks Modules (Pressure/Temp Sensors, and more)
iDash 1.8 Super Gauge for use with Banks Six-Gun/EconoMind Tuner and/or SpeedBrake.
Banks iDash 1.8 Super Gauge Universal OBD-II Monitor Expansion GaugeNew
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor on the market! Easy to read 2- to 8-gauge user selectable LCD display. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
This is a Expansion Gauge Only for use with 66560 Stand Alone Gauge Connect up to 4 iDash Gauges to display up to 32 data fields!
Customizable gauge display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
See more with additional gauges
Display 2-8 Data readings per gauge
Read up to 80 OBDII Mode 01 values
Over 300 parameters available
View Data your dash does not display
Displays accurate values your OEM dash gauges filter
Includes patented OBDII Density (exclusive to Banks)
Log up to 20 min/max values
Built-in Shift & RPM Light
Connect multiple iDash 1.8 gauges
Auto-Dimming Feature
Fits standard 52mm (2-1/16 inch) gauge mounts
Features vary by application
Still have questions!? Check the Documents tab above for the iDash Owners Manual
FITMENT NOTE:
This is an add-on gauge.Requires 66560 iDash 1.8 Super Gauge for vehicle communication (Not Included).
Banks iDash 1.8 Super Gauge Universal OBD-II Monitor Stand AloneNew
Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor on the market! Easy to read 2- to 8-gauge user selectable LCD display. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night.
Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously. Add Banks sensor modules such as the 4-channel analog module, 4-channel thermocouple module, and AirMouse Ambient Air Density Module for nearly infinite vehicle and weather analysis.
Features:
Customizable gauge display
Read Boost Pressure, EGT and so much more
Avoid costly repairs by monitoring important sensors
Display 2-8 values
Read up to 80 OBDII Mode 01 values
Over 300 parameters available
View Data your dash does not display
Displays accurate values your OEM dash gauges filter
Includes patented OBDII Density (exclusive to Banks)
Log up to 20 min/max values
Built-in Shift & RPM Light
Connect multiple iDash 1.8 gauges
Auto-Dimming Feature
Fits standard 52mm (2-1/16 inch) gauge mounts
Features vary by application
Still have questions!? Check the Documents tab for the iDash Owners Manual
Expand functionality with Banks Modules (Pressure/Temp Sensors, and more)
EDGE 98653 EAS SOTF ACCESSORY SYSTEM 11-16 GM 6.6L LML DURAMAXNew
Edge Products is proud to release the long awaited EAS accessory for switching EFI Live and EZ LYNK tunes through the CS2 or CTS2 Insight Monitors. Most custom tuning companies utilize voltage inputs to switch tunes on the fly, however, they are utilizing a rotary switch that requires drilling a hole in your dash to install. With the EAS SOTF accessory allows you to add this to your Insight using the EAS expandable starter kit that most of you already have (PT# EDG-98620). Changing your custom tunes is now as easy as selecting the desired power level at the top, center of your CTS2 screen or the up down button on the CS2. The voltage signal is a 5v input, with voltage varying from 1v up to 5v, which is the most common way that custom tunes are switched. The 6.6L LML Duramax SOTF EAS accessory connects to the ECM Pin Harness, so no cutting or splicing is required.
Features
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels. 2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters. 3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions. 4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
EDGE 98654 EAS SOTF ACCESSORY SYSTEM 2004.5-2010 GM 6.6L LLY LBZ LMM DURAMAXNew
Edge Products is proud to release the long awaited EAS accessory for switching EFI Live and EZ LYNK tunes through the CS2 or CTS2 Insight Monitors. Most custom tuning companies utilize voltage inputs to switch tunes on the fly, however, they are utilizing a rotary switch that requires drilling a hole in your dash to install. With the EAS SOTF accessory allows you to add this to your Insight using the EAS expandable starter kit that most of you already have (PT# EDG-98620). Changing your custom tunes is now as easy as selecting the desired power level at the top, center of your CTS2 screen or the up down button on the CS2. The voltage signal is a 5v input, with voltage varying from 1v up to 5v, which is the most common way that custom tunes are switched. The 6.6L LML Duramax SOTF EAS accessory connects to the ECM Pin Harness, so no cutting or splicing is required.
Features
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels. 2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters. 3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions. 4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
Edge Insight CTS3 OBDII Digital Gauge Monitor *NEW RELEASE*New
The Insight is the #1 preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. The Insight is the most comprehensive, state-of-the-art, multi-gauge touch-screen display on the market. It is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install. This is the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle, or for those who already have significant performance upgrades and want to safely monitor their vehicle's performance. Not only can the Insight monitor vehicle performance, but it can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle.
Exclusive Technology Not Available Anywhere Else!
Edge has raised the bar again with the innovative features in the CTS3 screen that are not found in similar tuners/monitors
Razor thin display integrates into your cab seamlessly unlike other bulky monitors and busy gauge clusters.
5” HD screen, the largest available on the market, accommodates up to multiple colors and clocks at a faster frame rate than competing monitors.
Proprietary one-touch navigation menu. Seamlessly swipe through data and check alerts with the most intuitive and improved user interface ever designed for a truck programmer/monitor
One HDMI cable to power the monitor and link your EAS accessories as opposed to multiple inputs and bulkier cables that come standard on other devices.
Day or night with Edge’s built in light sensitivity meter your monitor will adjust the brightness giving you the ideal brightness while driving.
Take Performance to the Next Level!
Edge has been and still is the king of truck performance and monitoring. We increase the maximum exposure of your engine while simultaneously monitoring parameters for alerts to improve your overall driving experience.
Multiple shift-on-the-fly performance tuning settings with EAS and serial to control power and control for any situation.
Log, graph, and export hundreds of parameter to track or improve performance
Test and track performance runs such as 0-60mph, and ¼ mile
Customize it and Make it Your Own!
Everyone’s needs are different. Whether you are using your truck for work, pleasure, or competition – no other vehicle monitoring system gives you more customization options than Edge!
Display hundreds of different combinations of gauges in digital or analog format in Metric or US units
Set audible & visual alert notifications when certain parameters or temperatures are met
Adjust the background screen, gauge arcs, keylines, and needles to virtually any color to make it your own or match your vehicle’s interior.
EAS (Expandable Accessory System) compatible.Does not come with EAS starter kit. # 98602 Starter Kit required to add additional sensors, probes, and switches and monitor them on the screen!
Add safety by installing a backup camera. CTS3 contains a USB port and accommodates the simple install of Edge’s Backup camera.
Your factory speedometer is no longer accurate once you add larger tires. Easily add your new tire size and display your true speed through your CTS3 Monitor.
Ships with state-of-the-art suction cup and ability to work with Edge’s custom mounting solutions for that factory installed look.
WiFi and Internet updatable to stay up with future feature releases never missing out on the next big thing.
Ford F-150 Gas Dash Pod
Durable high quality plastic (will not warp or deform even in direct sunlight)
Vacuum-formed edges
Manufactured for a perfect fit and finish
Angled for easy viewing
Easy installation
*If mounting the CTS product you will need the CTS adaptor kit. Click here to view part.
**PODs MAY NEED TO BE PAINTED TO MATCH COLOR OF INTERIOR
Ford 6.0L Dash Pod
Available for 2008-2012 Ford Super Duty trucks
Durable high quality plastic (will not warp or deform even in direct sunlight)
Vacuum-formed edges
Manufactured for a perfect fit and finish
Angled for easy viewing
Easy installation
*If mounting the CTS product you will need the CTS adaptor kit. Click here to view part.
**PODs MAY NEED TO BE PAINTED TO MATCH COLOR OF INTERIOR
***Will not fit the 2008-2010 King Ranch Editions. Will not fit 2013-14 F250s and F350s Lariat, King Ranch, or Platinum***
Edge Performance 21500 GM LB7 Duramax 6.6L Juice W/Attitude CTSNew
Juice with Attitude CS Available for GM Diesel Trucks
Edge Products proudly announces the release of the Juice with Attitude Color Screen (CS) GM Duramax Diesel trucks. The Juice with Attitude CS product offer the same great features and benefits users have come to expect from Edge Products along with a whole host of additional features!
FEATURES
6 On-the-Fly Adjustable Power Levels*
Full-color, high-resolution, 2.4 inch button-controlled screen (CS)
Up to an Additional 100 HP and 200 ft lb Torque*
Increase Fuel Economy*
Greatly Improves Drivability
Enhances Towing Performance
Excellent Throttle Response
Easy Installation
Ships with a universal suction cup mount
Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately)
Includes light sensitivity meter to dim screen as ambient light decreases
Internet Updateable (Attitude only)
Hot Unlock Codes available to unlock additional performance (additional fee and waiver required)
Comes with EGT Probe
Level 0: Stock
Level 1: 30 Horsepower - 60 Foot Pounds of Torque
Level 2: 40 Horsepower - 80 Foot Pounds of Torque
Level 3: 50 Horsepower - 90 Foot Pounds of Torque
Level 4: 60 Horsepower - 100 Foot Pounds of Torque
Level 5: 80 Horsepower - 130 Foot Pounds of Torque
Level 6: 100 Horsepower 200 Foot Pounds of Torque
Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form.
GAUGES
When used with the Attitude CS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time.
Boost
EGT
Barametric PSI
Speed MPH
Engine Coolant Temperature
Gear
Intake Air Temperature
Load%
Slip %
Transmission Temperature
Throttle%
Turbo Boost PSI
RPM
Backdown
SAFETY FEATURES
Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip*
Turbo Timer* (allows turbo to cool before truck shuts off)
Cold Engine Protection (no extra fuel is added until the engine is warm)
User-Adjustable Audible Alert Settings
IMPROVED DRIVEABILITY FEATURES
Low-Boost Fueling Adjustment
Shift Defuel Setting*
PERFORMANCE TESTING, ALERTS & RECORDS
Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters.
DATA LOGGING SOFTWARE
Fine tune your runs on the track, or prolong the life of your tow vehicle by identifying out of range parameters. The CS/CTS Data Logging feature can show you crucial data to help you identify the sweet spots as well as potential problems on your driving experience. Shaving a few tenths of a second off your race time, or running a few degrees cooler make all the difference. The data logging feature allows for a comprehensive, accurate picture of the vehicles condition, such as temperatures, pressures, speed, and more!
Log and store up to 10 unique logs at a time
Log hours of data
View and graph logs on your PC using the new MyStyle Software
View all parameters or pick which ones you want to view
View more information on Data Logging Software click here.
EXPANDABLE (items sold separately)
Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories
MYSTYLE SOFTWARE (included)
MyStyle software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.
*Increase in fuel efficiency varies based on driving style.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
Description: GM LB7 Duramax 6.6L Juice W/Attitude CTS
Condition: New
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $1,133.95
Sale: $1,050.95
Save: 7%
Save: $83.00
Edge Performance 21501 GM LLY Duramax 6.6L Juice W/Attitude CTSNew
Juice with Attitude CS Available for GM Diesel Trucks
Edge Products proudly announces the release of the Juice with Attitude Color Screen (CS) GM Duramax Diesel trucks. The Juice with Attitude CS product offer the same great features and benefits users have come to expect from Edge Products along with a whole host of additional features!
FEATURES
6 On-the-Fly Adjustable Power Levels*
Full-color, high-resolution, 2.4 inch button-controlled screen (CS)
Up to an Additional 100 HP and 200 ft lb Torque*
Increase Fuel Economy*
Greatly Improves Drivability
Enhances Towing Performance
Excellent Throttle Response
Easy Installation
Ships with a universal suction cup mount
Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately)
Includes light sensitivity meter to dim screen as ambient light decreases
Internet Updateable (Attitude only)
Hot Unlock Codes available to unlock additional performance (additional fee and waiver required)
Comes with EGT Probe
Level 0: Stock
Level 1: 30 Horsepower - 60 Foot Pounds of Torque
Level 2: 40 Horsepower - 80 Foot Pounds of Torque
Level 3: 50 Horsepower - 90 Foot Pounds of Torque
Level 4: 60 Horsepower - 100 Foot Pounds of Torque
Level 5: 80 Horsepower - 130 Foot Pounds of Torque
Level 6: 100 Horsepower 200 Foot Pounds of Torque
Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form.
GAUGES
When used with the Attitude CS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time.
Boost
EGT
Barametric PSI
Speed MPH
Engine Coolant Temperature
Gear
Intake Air Temperature
Load%
Slip %
Transmission Temperature
Throttle%
Turbo Boost PSI
RPM
Backdown
SAFETY FEATURES
Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip*
Turbo Timer* (allows turbo to cool before truck shuts off)
Cold Engine Protection (no extra fuel is added until the engine is warm)
User-Adjustable Audible Alert Settings
IMPROVED DRIVEABILITY FEATURES
Low-Boost Fueling Adjustment
Shift Defuel Setting*
PERFORMANCE TESTING, ALERTS & RECORDS
Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters.
DATA LOGGING SOFTWARE
Fine tune your runs on the track, or prolong the life of your tow vehicle by identifying out of range parameters. The CS/CTS Data Logging feature can show you crucial data to help you identify the sweet spots as well as potential problems on your driving experience. Shaving a few tenths of a second off your race time, or running a few degrees cooler make all the difference. The data logging feature allows for a comprehensive, accurate picture of the vehicles condition, such as temperatures, pressures, speed, and more!
Log and store up to 10 unique logs at a time
Log hours of data
View and graph logs on your PC using the new MyStyle Software
View all parameters or pick which ones you want to view
View more information on Data Logging Software click here.
EXPANDABLE (items sold separately)
Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories
MYSTYLE SOFTWARE (included)
MyStyle software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.
*Increase in fuel efficiency varies based on driving style.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
Description: GM LLY Duramax 6.6L Juice W/Attitude CTS
Condition: New
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $1,133.95
Sale: $1,019.95
Save: 10%
Save: $114.00
Edge Performance 21502 GM LBZ Duramax 6.6L Juice W/Attitude CTSNew
Juice with Attitude CTS Available for GM Diesel Trucks
Edge Products proudly announces the release of the Juice with Attitude Color Screen (CTS) GM Duramax Diesel trucks. The Juice with Attitude CTS product offer the same great features and benefits users have come to expect from Edge Products along with a whole host of additional features!
FEATURES
6 On-the-Fly Adjustable Power Levels*
Full-color, high-resolution, 4.3 inch touchscreen (CTS)
Up to an Additional 100 HP and 200 ft lb Torque*
Increase Fuel Economy*
Greatly Improves Drivability
Enhances Towing Performance
Excellent Throttle Response
Easy Installation
Ships with a universal suction cup mount
Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately)
Includes light sensitivity meter to dim screen as ambient light decreases
Internet Updateable (Attitude only)
Hot Unlock Codes available to unlock additional performance (additional fee and waiver required)
Comes with EGT Probe
Level 0: Stock
Level 1: 30 Horsepower - 60 Foot Pounds of Torque
Level 2: 40 Horsepower - 80 Foot Pounds of Torque
Level 3: 50 Horsepower - 90 Foot Pounds of Torque
Level 4: 60 Horsepower - 100 Foot Pounds of Torque
Level 5: 80 Horsepower - 130 Foot Pounds of Torque
Level 6: 100 Horsepower 200 Foot Pounds of Torque
Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form.
GAUGES
When used with the Attitude CTS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time.
Boost
EGT
Barametric PSI
Speed MPH
Engine Coolant Temperature
Gear
Intake Air Temperature
Load%
Slip %
Transmission Temperature
Throttle%
Turbo Boost PSI
RPM
Backdown
SAFETY FEATURES
Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip*
Turbo Timer* (allows turbo to cool before truck shuts off)
Cold Engine Protection (no extra fuel is added until the engine is warm)
User-Adjustable Audible Alert Settings
IMPROVED DRIVEABILITY FEATURES
Low-Boost Fueling Adjustment
Shift Defuel Setting*
PERFORMANCE TESTING, ALERTS & RECORDS
Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters.
DATA LOGGING SOFTWARE
Fine tune your runs on the track, or prolong the life of your tow vehicle by identifying out of range parameters. The CS/CTS Data Logging feature can show you crucial data to help you identify the sweet spots as well as potential problems on your driving experience. Shaving a few tenths of a second off your race time, or running a few degrees cooler make all the difference. The data logging feature allows for a comprehensive, accurate picture of the vehicles condition, such as temperatures, pressures, speed, and more!
Log and store up to 10 unique logs at a time
Log hours of data
View and graph logs on your PC using the new MyStyle Software
View all parameters or pick which ones you want to view
View more information on Data Logging Software click here.
EXPANDABLE (items sold separately)
Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories
BACK-UP CAMERA (sold separately)
The Attitude CTS features a built-in video port that allows users to connect the state-of-the-art Edge back-up camera, or other compatible video source directly to the CTS unit. View back-up camera click here.
MYSTYLE SOFTWARE (included)
MyStyle software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.
*Increase in fuel efficiency varies based on driving style.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
Description: GM LBZ Duramax 6.6L Juice W/Attitude CTS
Condition: New
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $1,133.95
Sale: $1,019.95
Save: 10%
Save: $114.00
Edge Performance 21503 GM LMM Duramax 6.6L Juice W/Attitude CTSNew
Juice with Attitude CTS Available for GM Diesel Trucks
Edge Products proudly announces the release of the Juice with Attitude Color Screen (CTS) GM Duramax Diesel trucks. The Juice with Attitude CTS product offer the same great features and benefits users have come to expect from Edge Products along with a whole host of additional features!
FEATURES
6 On-the-Fly Adjustable Power Levels*
Full-color, high-resolution, 4.3 inch touchscreen (CTS)
Up to an Additional 90 HP and 225 ft lb Torque*
Increase Fuel Economy*
Greatly Improves Drivability
Enhances Towing Performance
Excellent Throttle Response
Easy Installation
Ships with a universal suction cup mount
Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately)
Includes light sensitivity meter to dim screen as ambient light decreases
Internet Updateable (Attitude only)
Hot Unlock Codes available to unlock additional performance (additional fee and waiver required)
Comes with EGT Probe
Level 0: Stock
Level 1: 30 Horsepower - 60 Foot Pounds of Torque
Level 2: 40 Horsepower - 80 Foot Pounds of Torque
Level 3: 50 Horsepower - 95 Foot Pounds of Torque
Level 4: 60 Horsepower - 115 Foot Pounds of Torque
Level 5: 80 Horsepower - 135 Foot Pounds of Torque
Level 6: 90 Horsepower 225 Foot Pounds of Torque
Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form.
GAUGES
When used with the Attitude CTS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time.
DPF Status
Boost
EGT
Barametric PSI
Speed MPH
Engine Coolant Temperature
Gear
Intake Air Temperature
Load%
Slip %
Transmission Temperature
Throttle%
Turbo Boost PSI
RPM
Backdown
SAFETY FEATURES
Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip*
Turbo Timer* (allows turbo to cool before truck shuts off)
Cold Engine Protection (no extra fuel is added until the engine is warm)
User-Adjustable Audible Alert Settings
IMPROVED DRIVEABILITY FEATURES
Low-Boost Fueling Adjustment
Shift Defuel Setting*
PERFORMANCE TESTING, ALERTS & RECORDS
Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters.
DATA LOGGING SOFTWARE
Fine tune your runs on the track, or prolong the life of your tow vehicle by identifying out of range parameters. The CS/CTS Data Logging feature can show you crucial data to help you identify the sweet spots as well as potential problems on your driving experience. Shaving a few tenths of a second off your race time, or running a few degrees cooler make all the difference. The data logging feature allows for a comprehensive, accurate picture of the vehicles condition, such as temperatures, pressures, speed, and more!
Log and store up to 10 unique logs at a time
Log hours of data
View and graph logs on your PC using the new MyStyle Software
View all parameters or pick which ones you want to view
View more information on Data Logging Software click here.
EXPANDABLE (items sold separately)
Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories
BACK-UP CAMERA (sold separately)
The Attitude CTS features a built-in video port that allows users to connect the state-of-the-art Edge back-up camera, or other compatible video source directly to the CTS unit. View back-up camera click here.
MYSTYLE SOFTWARE (included)
MyStyle software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.
*Increase in fuel efficiency varies based on driving style.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
GM Truck/SUV Luxury Interior Dash Pod
Durable high quality plastic (will not warp or deform even in direct sunlight)
Vacuum-formed edges
Manufactured for a perfect fit and finish
Angled for easy viewing
Easy installation
*If mounting the CTS product you will need the CTS adaptor kit. Click here to view part.
**PODs MAY NEED TO BE PAINTED TO MATCH COLOR OF INTERIOR
Description: GM Truck/SUV Luxury Interior Dash Pod
Condition: New
Price: $40.00
Edge Performance 30200 Dodge 24 V EZ 5.9LNew
KEY FEATURES:
3 Adjustable Power Levels
Quick and Easy Installation
Additional 65 HP and 180 ft lb Torque
Increases Fuel Economy*
Greatly Improves Driveability and Performance
Helps Eliminate Downshifting While Towing
Excellent Throttle Response
The EZ is the ultimate performance upgrade for the driver that wants affordable adjustability, added towing power, quick and easy installation, and improved fuel economy.
The EZ offers a quick 10 minute installation that requires no expensive mechanic labor, no drilling, and no computer downloading. Simply plug the Edge EZ into 2 stock connections and you're ready to go.
The EZ provides real power you can switch between 3 power levels to add up to 65 HP. The EZ safely provides power to help eliminate downshifting.
The EZ is also tuned with a special fuel economy level* that improves the atomization of fuel, which in turn allows Edge to add power, while at the same time delivering between a 5-10% improvement in MPG when driving in level one. Add to that the EZ's price point and you have the ultimate value on the performance market today.
There is not another product on the market today that delivers power so safely and so economically, and at the same time is so easy to install.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge EZ module. Power gains may vary based on vehicle and geographical location.
Level 1: 20 Horsepower - 45 Foot Pounds of Torque
Level 2: 30 Horsepower - 77 Foot Pounds of Torque
Level 3: 65 Horsepower - 180 Foot Pounds of Torque
*Increase in fuel efficiency varies based on driving style.
Edge recommends the use of gauges when using any performance upgrade.
CARB/EPA COMPLIANCE
California Air Resources Board Executive Order D-541
This product meets the emissions compliance requirements of the California Air Resources Board and Federal Environmental Protection Agency and is legal for sale and use on pollution-controlled vehicles operated on public streets and highways. It must be installed and operated according to the instructions provided. (This E.O. number only applies to the 1998.5 and 1999 Dodge Cummins. Does not apply to the 2000 Dodge Cummins.)
2000 Dodge Cummins Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $508.95
Sale: $457.95
Save: 10%
Save: $51.00
Edge Performance 30201 Dodge 24 V EZ 5.9LNew
KEY FEATURES:
3 Adjustable Power Levels
Quick and Easy Installation
Additional 65 HP and 180 ft lb Torque
Increases Fuel Economy*
Greatly Improves Driveability and Performance
Helps Eliminate Downshifting While Towing
Excellent Throttle Response
The EZ is the ultimate performance upgrade for the driver that wants affordable adjustability, added towing power, quick and easy installation, and improved fuel economy.
The EZ offers a quick 10 minute installation that requires no expensive mechanic labor, no drilling, and no computer downloading. Simply plug the Edge EZ into 2 stock connections and you're ready to go.
The EZ provides real power you can switch between 3 power levels to add up to 65 HP. The EZ safely provides power to help eliminate downshifting.
The EZ is also tuned with a special fuel economy level* that improves the atomization of fuel, which in turn allows Edge to add power, while at the same time delivering between a 5-10% improvement in MPG when driving in level one. Add to that the EZ's price point and you have the ultimate value on the performance market today.
There is not another product on the market today that delivers power so safely and so economically, and at the same time is so easy to install.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge EZ module. Power gains may vary based on vehicle and geographical location.
Level 1: 20 Horsepower - 45 Foot Pounds of Torque
Level 2: 30 Horsepower - 77 Foot Pounds of Torque
Level 3: 65 Horsepower - 180 Foot Pounds of Torque
*Increase in fuel efficiency varies based on driving style.
Edge recommends the use of gauges when using any performance upgrade.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $508.95
Sale: $457.95
Save: 10%
Save: $51.00
Edge Performance 30203 Dodge EZ 5.9L Common Rail CRNew
KEY FEATURES:
3 Adjustable Power Levels On-The-Fly
Quick and Easy Installation
Additional 65 HP and 150 ft lb Torque
Increases Fuel Economy*
Greatly Improves Driveability and Performance
Helps Eliminate Downshifting While Towing
Excellent Throttle Response
The EZ is the ultimate performance upgrade for the driver that wants affordable adjustability, added towing power, quick and easy installation, and improved fuel economy.
The EZ offers a quick 10 minute installation that requires no expensive mechanic labor, no drilling, and no computer downloading. Simply plug the Edge EZ into 2 stock connections and you're ready to go.
You can switch between 3 power levels to add up to 65 HP. The EZ safely provides power to help eliminate downshifting while towing.
The EZ is also tuned with a special fuel economy level* that improves the atomization of fuel, which in turn allows Edge to add power, while at the same time delivering between a 5-10% improvement in MPG when driving in level one. Add to that the EZ's price point and you have the ultimate value on the performance market today.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge EZ module. Power gains may vary based on vehicle and geographical location.
Level 1: 25 Horsepower - 50 Foot Pounds of Torque
Level 2: 45 Horsepower - 100 Foot Pounds of Torque
Level 3: 65 Horsepower - 150 Foot Pounds of Torque
*Increase in fuel efficiency varies based on driving style.
Edge recommends the use of gauges when using any performance upgrade.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $508.95
Sale: $457.95
Save: 10%
Save: $51.00
Edge Performance 30204 Dodge EZ 600/610 Series Common RailNew
KEY FEATURES:
3 Adjustable Power Levels
Quick and Easy Installation
Additional 65 HP and 150 ft lb Torque
Increases Fuel Economy*
Greatly Improves Driveability and Performance
Helps Eliminate Downshifting While Towing
Excellent Throttle Response
The EZ is the ultimate performance upgrade for the driver that wants affordable adjustability, added towing power, quick and easy installation, and improved fuel economy.
The EZ offers a quick 10 minute installation that requires no expensive mechanic labor, no drilling, and no computer downloading. Simply plug the Edge EZ into 2 stock connections, snap in the power adjustment switch, and you're ready to go.
The EZ provides real power and adjustability you can switch between 3 power levels to add up to 65 HP with a toggle switch. The EZ safely provides power to help eliminate downshifting while towing.
The EZ is also tuned with a special fuel economy level* that improves the atomization of fuel, which in turn allows Edge to add power, while at the same time delivering between a 5-10% improvement in MPG when driving in level one. Add to that the EZ's price point and you have the ultimate value on the performance market today.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge EZ module. Power gains may vary based on vehicle and geographical location.
Level 1: 25 Horsepower - 50 Foot Pounds of Torque
Level 2: 45 Horsepower - 75 Foot Pounds of Torque
Level 3: 65 Horsepower - 150 Foot Pounds of Torque
*Increase in fuel efficiency varies based on driving style.
Edge recommends the use of gauges when using any performance upgrade.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $508.95
Sale: $457,395.00
Save: -89770%
Save: $-456886.05
Edge Performance 30300 Dodge 24 V Comp 5.9LNew
The Edge Comp module maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters of your Cummins engine. The Comp module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump.
The Edge Comp features five power levels with power gains from 40-120 horsepower. Each of the levels has five independent adjustable sub-levels to control low boost fueling, providing a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low boost smoke control no matter what additional power modifications have been made to the engine. The Comp module is fully adjustable on-the-fly and mounts inside the cab.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Juice module. Power gains may vary based on vehicle and geographical location.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
This Product is Not C.A.R.B Approved. This Product Cannot Ship to California
Price: $856.95
Sale: $770.95
Save: 10%
Save: $86.00
Edge Performance 30301 Dodge 24 V Comp 5.9LNew
The Edge Comp module maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters of your Cummins engine. The Comp module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump.
The Edge Comp features five power levels with power gains from 40-120 horsepower. Each of the levels has five independent adjustable sub-levels to control low boost fueling, providing a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low boost smoke control no matter what additional power modifications have been made to the engine. The Comp module is fully adjustable on-the-fly and mounts inside the cab.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Juice module. Power gains may vary based on vehicle and geographical location.
Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
As the originators of STYLE and performance; we are excited to announce the Universal 2-1/16 Gauge Pillar Adapter for the CS/CTS products. This adapter allows you to mount the CS or CTS products in a 2-1/16 Gauge Pillar Pod. The adapters state-of-the-art swivel system, gives you the flexibility to adjust the monitor to your own optimal viewing angle. Knowing many of you are buying the Edge CS or CTS to replace existing gauges or just want that clean finish look this product is for you.
Universal 2-1/16 gauge pillar adapter CS/CTS
Swivel adjustment for optimal viewing angle
Screw tight locking connectors
Works with most 2-1/16 gauge mounts
EAS Starter Kit
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.
*EAS Starter Kits are only available to work with the CS and CTS product lines. In order to use the EAS accessories you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603).
Edge Performance 98604 EAS Universal Turbo TimerNew
Universal Turbo Timer
The EAS Universal Turbo Timer part # 98604 is designed for all diesel engines besides the 2006-2014 Dodge Cummins. The 2006-2014 Dodge Cummins EAS Turbo timer part # is 98612. The 2006-2014 Dodge Cummins uses different connectors for installation.
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine won't burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at high speed.
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.
*Turbo timers are only available to work with the CS and CTS product lines. In order to use the turbo timer you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603).
Edge Performance 98605 EAS Universal Sensor Input-5 VoltNew
The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges to your Edge CS and CTS! Using the Edge Accessory System provides the following benefits:
Using the MyStyle software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input accessories may be installed in any order on the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS or CTS device.
NOTE: Sensors from manufacturers other than Edge can also be attached to a CS or CTS device through the EAS Universal Sensor Input
Eliminates the necessity of routing multiple wires to the CS / CTS Monitor
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C
The EAS Temperature Sensor is a -40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Sensor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Use this in conjunction with the Universal Sensor Input and the CS or CTS monitor to allow you to view critical temperatures with the most state-of-the-art product on the market today.
This is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS. Install the new switch and use Edge's MyStlye software to name your accessory to display right on the screen and take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off.
Edge Performance 98610 EAS Ambient Temperature SensorNew
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40F to 230F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now youll never wonder what outside air temperature is again!
Edge Performance 98611 EAS EGT Expandable W/O Starter KitNew
Expandable EAS EGT without Start Kit The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. With the EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise. The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.
*EAS Starter Kits are only available to work with the CS and CTS product lines. In order to use the EAS accessories you must have an EAS Starter kit (part # 98602).
The 2006-2014 Dodge Cummins EAS Turbo timer part # is 98612. The 2006-2014 Dodge Cummins uses different connectors for installation. The EAS Universal Turbo Timer part # 98604 is designed for all diesel engines besides the 2006-2014 Dodge Cummins.
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine won't burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at high speed.
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.
*Turbo timers are only available to work with the CS and CTS product lines. In order to use the turbo timer you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603).
Edge Performance 98620 EAS Starter Kit w/ EGT Probe for CTS3 Insight and CTS3 EvolutionNew
Our number one selling CTS3 and CTS3 Evolution add on accessory! This kit includes everything you need to connect an EGT probe to your insight.
Works with:
Edge's CS, CS2, CTS, CTS2, & CTS3
Features:
Expandable, Works with additional Edge Accessories
15" Lead on EGT Probe
Can Replace Probe without Replacing EAS Harness
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. With the EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise. The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.
Description: Works with Edge's CS, CS2, CTS, CTS2, & CTS3
Condition: New
Price: $162.00
Sale: $144.95
Save: 11%
Save: $17.05
SCT 7015 X4 Power Flash Programmer 1999-2016 Ford Diesel 7.3 6.0 6.4 6.7New
Features:
Built-In Wifi for easy updates Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.
Clearing DTCs
Reads & Clears PCM Diagnostic Trouble Codes.
Data Logging
Need to monitor your vehicle's engine parameters? No need for a separate monitoring device. View & record your vehicle's PCM data on the device or on a PC.
Dual Analog Inputs
Monitor EGT temps, air-fuel ratio and other popular sensor data.
Easy Restoration Back to Stock
The device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock program. Restoring your vehicle to the stock PCM program is as easy as selecting "Return to Stock" from the device men...
Full Color Backlit LCD Display
Full Color LCD display for easy viewing, day or night.
Holds up to 10 Custom Tunes
Holds up to 10 custom tuning files for Maximum tune flexibility.
Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage
Installs Quickly & Easily
Installs quickly & easily via your vehicle's OBDII port.
Most Popular Vehicles Supported
Most popular Ford vehicles supported including 2014 models.
Stores 20 Custom Tunes
Stores up to 20 custom tune files created by your local SCT Custom Tuning Dealer.
USB Interface Cable Included
USB Interface Cable & Livelink Datalogging software included
User Adjustable Vehicle Parameters
Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears
