Dirty Hooker Diesel - LBZ Injectors

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

What size injector should I be looking at?

We always recommend contacting us directly so we can go over your build with you and come up with the ideal setup. Below is a outline of some basic information regarding injector sizes.

Exergy 20-30% Over Injectors:

This is our number one selling injector size due to price and functionality. This is a great upgrade from stock when your injectors need replacing and will work great with a factory CP3 pump. We always recommend the addition of a lift pump, but at this level isnt required. A 20-30% over injector will have a flow improvement that will help with fuel economy and throttle response. When properly tuned, engine longevity will be increased due to the reduction in pulse width and timing. Also, most of the smoke normally associated with bigger injectors can be cleaned up and the truck will still run as clean as stock.

Exergy 40-60% Over Injectors:

Injectors with 40-60% increase are great for guys with a moderate turbo upgrade. This level is probably on the large side for a factory sized turbo but can be used with them. Proper tuning will go a long way with larger style injectors as aftermarket box tuners will no longer be adequate. When using injectors in this size range, you should have a lift pump setup on your truck. Running twin CP3s or a least a modified injection pump is recommended for ideal performance.

Exergy 70-100% Over Injectors:

Injectors with a 70-100% increase are great for those running larger single turbo or compound turbocharger applications. Generally used in drag racing or sled pulling applications but can be streetable with proper tuning. At this level, you will NEED to have a modified stroker CP3 pump or twin CP3s as well as a lift pump to properly supply these injectors with enough fuel.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

What size injector should I be looking at?

We always recommend contacting us directly so we can go over your build with you and come up with the ideal setup. Below is a outline of some basic information regarding injector sizes.

Exergy 20-30% Over Injectors:

This is our number one selling injector size due to price and functionality. This is a great upgrade from stock when your injectors need replacing and will work great with a factory CP3 pump. We always recommend the addition of a lift pump, but at this level isnt required. A 20-30% over injector will have a flow improvement that will help with fuel economy and throttle response. When properly tuned, engine longevity will be increased due to the reduction in pulse width and timing. Also, most of the smoke normally associated with bigger injectors can be cleaned up and the truck will still run as clean as stock.

Exergy 40-60% Over Injectors:

Injectors with 40-60% increase are great for guys with a moderate turbo upgrade. This level is probably on the large side for a factory sized turbo but can be used with them. Proper tuning will go a long way with larger style injectors as aftermarket box tuners will no longer be adequate. When using injectors in this size range, you should have a lift pump setup on your truck. Running twin CP3s or a least a modified injection pump is recommended for ideal performance.

Exergy 70-100% Over Injectors:

Injectors with a 70-100% increase are great for those running larger single turbo or compound turbocharger applications. Generally used in drag racing or sled pulling applications but can be streetable with proper tuning. At this level, you will NEED to have a modified stroker CP3 pump or twin CP3s as well as a lift pump to properly supply these injectors with enough fuel.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

What size injector should I be looking at?

We always recommend contacting us directly so we can go over your build with you and come up with the ideal setup. Below is a outline of some basic information regarding injector sizes.

Exergy 20-30% Over Injectors:

This is our number one selling injector size due to price and functionality. This is a great upgrade from stock when your injectors need replacing and will work great with a factory CP3 pump. We always recommend the addition of a lift pump, but at this level isnt required. A 20-30% over injector will have a flow improvement that will help with fuel economy and throttle response. When properly tuned, engine longevity will be increased due to the reduction in pulse width and timing. Also, most of the smoke normally associated with bigger injectors can be cleaned up and the truck will still run as clean as stock.

Exergy 40-60% Over Injectors:

Injectors with 40-60% increase are great for guys with a moderate turbo upgrade. This level is probably on the large side for a factory sized turbo but can be used with them. Proper tuning will go a long way with larger style injectors as aftermarket box tuners will no longer be adequate. When using injectors in this size range, you should have a lift pump setup on your truck. Running twin CP3s or a least a modified injection pump is recommended for ideal performance.

Exergy 70-100% Over Injectors:

Injectors with a 70-100% increase are great for those running larger single turbo or compound turbocharger applications. Generally used in drag racing or sled pulling applications but can be streetable with proper tuning. At this level, you will NEED to have a modified stroker CP3 pump or twin CP3s as well as a lift pump to properly supply these injectors with enough fuel.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

What size injector should I be looking at?

We always recommend contacting us directly so we can go over your build with you and come up with the ideal setup. Below is a outline of some basic information regarding injector sizes.

Exergy 20-30% Over Injectors:

This is our number one selling injector size due to price and functionality. This is a great upgrade from stock when your injectors need replacing and will work great with a factory CP3 pump. We always recommend the addition of a lift pump, but at this level isnt required. A 20-30% over injector will have a flow improvement that will help with fuel economy and throttle response. When properly tuned, engine longevity will be increased due to the reduction in pulse width and timing. Also, most of the smoke normally associated with bigger injectors can be cleaned up and the truck will still run as clean as stock.

Exergy 40-60% Over Injectors:

Injectors with 40-60% increase are great for guys with a moderate turbo upgrade. This level is probably on the large side for a factory sized turbo but can be used with them. Proper tuning will go a long way with larger style injectors as aftermarket box tuners will no longer be adequate. When using injectors in this size range, you should have a lift pump setup on your truck. Running twin CP3s or a least a modified injection pump is recommended for ideal performance.

Exergy 70-100% Over Injectors:

Injectors with a 70-100% increase are great for those running larger single turbo or compound turbocharger applications. Generally used in drag racing or sled pulling applications but can be streetable with proper tuning. At this level, you will NEED to have a modified stroker CP3 pump or twin CP3s as well as a lift pump to properly supply these injectors with enough fuel.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Exergy Performance Injectors via DHD

Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance. We here at DHD are one of the elite few Exergy dealers with the privilege to provide you with this product.

If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.

All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.

Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.

Special Introductory Pricing and FREE 14x1.5 Adapter

This slide action tool gives you the upper hand on removing injectors! A must for any toolbox!

Features:

-Swivel End for Special Fitments

-Able to be Completely Disassembled for Maintenance and Replacement

-Multipurpose Adapter Line

-Easy to Use

-KDT is Constantly Looking to Expand the Adapter Line

-Bottle of Assembly Lubricant Included for NO extra charge

-2-Year Limited Warranty

14x1.5 Adapter fits the following models: (Included)

1996+ Volkswagen TDI Injectors

Cummins Fuel Feed Tubes 1994-1998

Cummins 12 Valve Injectors

2003-Current Cummins Fuel Tubes

2001+ Duramax Injectors

2011+6.7L Powerstroke Injectors

Miscellaneous Agriculture and Heavy Duty Vehicle Injectors (with 14x1.5 thread pitch)

12x1.5 Adapter fits the following models: (Purchased Separately)

Pre-1993 Cummins Injectors

Mercedes Benz BlueTEC Injectors

Ram EcoDiesel Injectors

Miscellaneous Agriculture and Heavy Duty Vehicle Injectors (with 12x1.5 thread pitch)

Glow Plug Attachment: (Purchased Separately)

06+ Duramax Glow Plugs Bosch style fuel injection components should be compatible

NOTE: All of these fitments are just what we KNOW the item works on, other fitments may also be discovered.