PPE 116005500 GT40R Series Turbo Installation Kit - GM 6.6L Duramax 2004.5-2005 LLY Kit

When you are ready to take the horsepower output of your Duramax truck to the next level, get our PPE GT40R Series Turbo Installation Kit.

The stock turbocharger is pretty good for stock or lightly modified vehicles, but it has limitations that may be restrictive, to the other modifications done to an engine. However, for those customers who live and breathe diesel power, or plan to upgrade their electronics or fuel delivery, and exhaust systems in a quest for stump-pulling torque, the next logical step is to add more pressure. With a PPE turbo installation kit, adding a midsize framed turbo with a T4 mount is simply a bolt-on installation job.

At the heart of this kit, is a sturdy cast PPE T4 Pedestal, which was specifically designed to support the weight of the turbocharger. The T4 Pedestal is made from the same high-sil moly material as our Race High Flow Exhaust Manifolds. Also included, is a 304 Stainless Steel, mandrel-bent, 3 inch diameter down pipe that will connect the turbo to a stock exhaust system via supplied V-band clamps. The mounting hardware, gaskets and hoses are also supplied.

Thanks to its T4 ready pedestal, this kit will mount any T4 based turbocharger. But for those of you who want it all, PPE offers a kit that comes with a high-quality Garrett GT40R turbocharger. PPE and Garrett have worked together on many projects. With our extensive, first-hand experience working with quality Garrett products, we have made the decision to continue to use Garrett turbochargers as the first choice in our GT40R Series Turbo Kit.

Features:
- Turbo Pedestal for use with aftermarket 40 series turbos
- Turbo weight supported by pedestal framework, not by tubing
- High velocity tubular design
- Low heat loss 304 stainless construction
- V Band Clamps Included


Note: Legal in California only for racing vehicles which may never be used on the highway.
This notice pertains to engine and vehicles which are off the public highways except where specifically noted otherwise. Federal law restricts the removal of any part of a federally required emission control system on motor vehicles. Further, many states have enacted laws which prohibit tampering with or modifying any required emission or noise control system. Vehicles which are not operated on public highways are generally exempt from most regulations, as are some special interest and pre-emission vehicles. The reader is strongly urged to check all applicable local and state laws.
Many of the parts described or listed on this website are merchandise for off-highway application only, and are tagged with the Special Parts Notice reproduced here:

SPECIAL PARTS NOTICE:
This part has been specifically designed for Off-Highway application only. Since the installation of this part may either impair your vehicles emission control performance or be uncertified under current Motor Vehicle Safety Standards, it should not be installed in a vehicle used on any street or highway. Additionally, any such application could adversely affect the warranty coverage of such an on-street or highway vehicle.